Light Pole Straightening Machine Mobile Horizontal Type WJZ - 30 - 4000

路灯杆移动卧式校直机

Light pole mobile horizontal type straightening machine

型号Model:WJZ-30-4000

最大直径Max. diameter:300mm

最大长度Max.length: 12m

(可以杆子移动满足14米校直Can meet the pole movement of 14 meters)

适合普通路灯杆 suitable for ordinary light pole

应用:本机主要用于路灯杆在合缝焊接和热镀锌后的弯曲变形,进行校直.

Application: It’s mainly used for straightening the deformation caused by the seam welding or hot-dip galvanizing.

专有特点:Proprietary

• 卧式的校直方式,更加容易观察发现弯曲点,校直的状况.操作难度降低.

Horizontal alignment method,It is easier to observe the bending point and the straightening condition. Operation difficulty is reduced.

• 卧式的方式,便于杆子物流,少用行车.The horizontal working way is convenient for pole logistics and less use of crane.
• 杆子不动,校直主机移动,减少操作人数,降低操作人员的劳动强度.The pole does not move, but the straightening host machine moves, which can reduce the number of operators and reducing their labor intensity.
• 在比较大的压直力作用下,由于压点的接触面积大,避免在杆件表面出现压痕.Under the relatively large straightening force, due to the large contact area of the indentation point, which can avoid indentations on the light pole surface.
• 聚胺脂覆盖压点防止压痕.Polyurethane covers the pressure points to prevent indentation
• 工作台长度为4米,以便适合不同直径的杆件.The length of the table is 14 meters to suit different diameter light poles
• 校直支点和工作台,螺栓连接,可以根据杆件具体情况移动,以适合不同直径和厚度的路灯杆.The straightening fulcrum and worktable are connected by bolts, can be moved according to the specific conditions of the poles to suit the different diameters and thicknesses.
• 油缸下支点为活动V槽,适合不同锥度和不同棱边的要求.The lower fulcrum of the hydraulic cylinder is a movable V groove, which is suitable for the requirements of different tapers and different edges.
• 校直主机沿着杆子轴向移动,需要时,人工旋转杆子.The straightening host moves along the axis of the poles, and when necessary, can manually rotate the pole.
• 杆子位于中间桥上,全滚轮,便于杆子前后移动. The pole is located on the middle bridge, with full rollers for easy back and forth movement of the poles
• 带无线遥控操作手柄,更加简单,避免电缆来回拖拽损坏.With a wireless remote control handle, it is more simple and can avoid damage by dragging the cable back and forth

主要技术参数main technical parameters