ROBOT BASE PLATE WELDING MACHINE , Model : RBW3-120/260 With three welding stations
|Place of Origin:||wuxi, china|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Price:||according to the machine requirement|
|Packaging Details:||Suitable for container shipping|
|Delivery Time:||according to the machine requirment|
|Payment Terms:||Down payment 30% T/T, 70% T/T before shipping|
|Supply Ability:||According requirement|
Robotic Welding Arm,
Robotic Welding Equipment
100W 120W 130W 150W Laser Robotic Welding Equipment for Wood Acrylic
Equipped standard with a simplified teaching screen that is dedicated to welding and easy operation, the system conducts welding like a skilled human welder. The teach pendant is even equipped with an easy-to-view, easy-to-operate color LCD touch-screen.
Optimized welding machine connected via a single cable
With a built-in interface dedicated to welding machine, the system can readily be linked to the robots via a single cable.
Your welding conditions are stored and can be called up as a data base
Welding conditions can be classified and registered in a database, where they are ready to be used again whenever needed at the touch of a button.
Minor stoppages have been substantially reduced
The system comes equipped standard with a dedicated start sequence function that improves the arc start ratio, as well as a restart sequence function that sends the robot back to the point where welding was interrupted and automatically conducts overlapped welding, thereby restarting the welding operation.
A full section of specific options
(1) Servo-torch, (2) Touch-sensing (15VDC; 400VDC), (3) Special weaving pattern, (4) RTPM (Arc sensor), (5) Start-point sensing, (6) Multilayer welding function, (7) AVC (Arc-sensor dedicated to TIG welding), and more.
Allows use in environment with a lot of electrical noise
The system incorporates a range of innovations, developed from the design phase to cope with noise generation in TIG welding, plasma cutting, etc., so it can be operated without about having to worry about noise-related constraints.
Realize a fully “Teaching-less” welding system
Combining the robots with KCONG realizes a fully “Teaching-less” welding system.
JT1 : 360° 118 120
410 JT4 : ±360°
JT2 : 135°
P JT5 : ±145°
JT6 : ±360°
4-M5 Dp8 ø0.2 X Y
• Shock sensor
• Torch bracket (350 A/500 A)
• Installation base (600mm/300mm)
• Base plate (750mm×750mm×25mm)
• Liner slide
• RTPM (Arc sensor)
• AVC (Arc-sensor dedicated to TIG welding) • 3D laser sensor
• Wall mounting