|
Product Details:
|
| Tile Type:: | Steel | Place Of Origin:: | Wuxi,China |
|---|---|---|---|
| Production Capacity:: | 8-12m/min | Condition:: | New |
| Usage:: | Construction Beam | Dimension(L*W*H):: | 12800mm*1.55mm*1.3mm |
| Highlight: | 8m / Min Guard Rail Forming Machine,748mm Guardrail Roll Forming Machine |
||
2 waves and 3 waves guardrail roll forming machine
We provide shipping service for Two waves Cold Rolled highway guardrail roll Forming Machine
1. Machines need one 20/40 feet container to load .
2.We have professional technicians for loading to make sure machine has no damage.
3.Please provide us the nearest port name, we will ask shipping cost and arrange shipping for you.
I.Specification
| Item: | Specification: | Notes: | |
| 1.Information of raw material | Suitable material: | Galvanized coil | |
| Width: | 748mm | ||
| Thickness: | 2.5-3.5mm | ||
| Yield strength: | Q235A HR | ||
| 2.Production specification | Detailed as the file | ||
| 3.Power requirement: | Main power: | 22kw two sets |
With inventor (normal standard) |
| Cutter power: |
15.5kw(pressure:25mpa) 3 pcs cutter |
||
| Speed of machine: | 10-15meters/min | ||
|
5.Hydraulic de-coiler: |
Loading: | 5tons | Main power:3kw |
| Inner diameter | 508mm | ||
| Type: | Automatic type | ||
|
6.Machine specification: |
Structure: | 400I beam |
Transform method : Gearbox with shaft |
| Roll stations: |
20 roll stations (with 6pcs rollers for leveling diameter:80mm) |
||
| Splint thickness: | 22mm | ||
| Diameter of shaft: | 110mm, | ||
| Material of shaft: | Forged 45# steel | ||
| Type of cutting: | Saw cutting | ||
| Material of roller: |
CR12 with heat treatment: HRC58-62 |
||
| Sizes of machine: | 15.5*1.0*1.5meters | ||
| Material of punching mold: | Cr12,hydraulic pre-punching | ||
| Sizes of chain: |
2.0inch |
||
We provide superior service for Two waves Cold Rolled highway guardrail roll Forming Machine
1.Payment Term: 30% paid by T/T as down payment, the rest 70% after inspection by buyer in seller’s factory while before delivery. After finished production, we will inspect the machine and inform the buyer, the buyer send person to inspect goods, then payoff the whole payment before shipping.
2.Delivery Time: We guarantees the equipment will be ready for shipment within 30 working days after receipt of deposit .
3.After sale Service: We could send technician to your country to install machine if you need. The buyer need to pay for extra cost, including: visa, round trip tickets, accommodation, salary of USD 100~120 per day.
equipment structure diagram:
III.Basic machine parameters
Material: Q345B galvanized sheet
Thickness: 2.5～3.0mm
Width: 450-476mm
Weight: 65KG
Specifications of products
Product: by product drawing
Product width: 310mm ± 5mm
Product height: 81mm ± 5mm
Product specifications
Forming method: Cold roll forming
Production speed: ≤10m / min
Feeding direction: left feed
Main voltage: 380V, 50Hz
Unit total power: about 20.7KW
Drive shaft bearing: 6026
Turbo lift: SWL10-3 / 23-FU3
Main drive motor: YVP180M-4-15
Reducer: ZQ500-48.57
Wallboard material: A3
Shaft material: 40
Mold material: Gcr15
IV,Overview of equipment structure
The equipment frame is processed by A3 steel plate, after aging treatment, 3-roller structure, 1 upper and 2 lower, the lower roller adopts a fixed structure, the upper roller adopts slider movement adjustment, and 3 sets of turbine box drive are driven by the motor to adjust the upper and lower The turbine box is connected by a connecting rod to ensure the synchronization of 3 sets of boxes, and the 3 independent wall plates are connected by a shaft to ensure the parallelism of the whole machine. The diameter of the roller shaft is 110mm. There are two sets of molds on the left and right, one for the inner arc and one for the outer arc, and a set of 15KW main motor. It is driven by a ZQ500 reducer, which drives the left and right lower shafts through gears.The gear module is 10m, one for each left and right.The product is processed through the operation console.
V,Equipment configuration checklist
| No |
Part Name |
Quantity |
| 1 |
Forming mould |
One set of molds on each side |
| 2 |
15KW drive motor |
1Set |
| 3 |
Forming mold shaft |
3Sets |
| 4 |
Turbo lift |
3Sets |
| 5 |
Lifting drive motor |
1Set |
| 6 |
ZQ500 reducer |
1Set |
| 7 |
Electrical console |
1Set |
| 8 |
Equipment anchor bolt |
1Set |
Contact Person: kimi
Tel: 15861457507
Fax: +86-510-68930088
