Standard cut to length line , hot rolled mild steel light pole machine for 6m 8m 14m
|Place of Origin:||Wuxi , China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Price:||according to the machine requirement|
|Packaging Details:||Suitable for container shipping|
|Supply Ability:||50-60 days|
1200mm High mast clamping device,
12mm High mast clamping device
High mast assembly & straightening machine, model: HJZ-1200
(High mast clamping device)
1. It is mainly suitable for highmast and power transmission monopoles. After bending, The two pieces of pole are assembled by the upper and side oil cylinders, and then spot welding is performed by hand to facilitate the next welding process.
2. Straighten the pole after longitudinal welding
3. Round the pole after welding to facilitate flange assembly.
MAIN TECHNICAL FEATURES
Max, diameter of the pole
Max, thickness of the pole
|6||Max distance from rod to worktable||Mm||1350|
|7||Two-side cylinder output force||KN||300X2|
|8||lateral cylinder stroke||mm||400|
|9||Movement distance from upper to lower for two-side cylinder||mm||530|
|10||Max working pressure||MPa||25|
|11||Height above ground of worktable||mm||305|
|12||Column inner distance||mm||1650|
|13||Total motor power||kW||18.5+5.5|
The machine is triple-beam and working table structure, main cylinder is installed on the central of upper beam to do up and down. Two side-cylinder is installed in vertical column and it can move up and down.
All the actions are manual mode, which means when press corresponding button, relevant action will be made and stop after release, and cylinder on two sides can also be operated separately or simultaneously.
Two supporting rollers are installed in the work table’s anteroposterior, in order to the pole go forward and backward easily.