|
Product Details:
|
| High Light: | 1500mm Light Pole Door Cutting Machine,8mm Light Pole Door Cutting Machine |
||
|---|---|---|---|
Application:
It is suitable for conical pole, round pole, octagonal light pole and highmast door CNC cutting, Also it can flat plate . The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw designed by computer.
The cutting source is automatic plasma. So the cutting speed will be much fast, and cutting edge quality is much better then flame cutting.
Main parameters:
| No. | Item | Parameter |
| 1 |
Max. cutting length, X axis |
2000mm (for once stroke cutting) |
| 2 |
Max. cutting length, X axis |
1500mm |
| 3 |
Rotation angle, A axis |
Any angle 0~360 degree |
| 4 | Min outer diameter | 58mm |
| 5 | Max outer diameter | 680mm |
| 6 | Max.length for pole | 12000mm |
| 7 | Max.thickness for highmast | 8mm |
| 8 | Plasma source |
Hypertherm Powermax 65 (Made in USA) |
| 9 | Suggestion thickness for making hole and quality cutting. | 8mm |
| 10 | Quality Cutting speed ,thickness 4mm | 4250mm/minute |
| 11 | Quality Cutting speed ,thickness 6mm | 2550mm/minute |
| 12 | Quality Cutting speed ,thickness 8mm | 1700mm/minute |
| 13 |
Max plasma edge cutting thickness(manual holding way) |
Base on Plasma source 14mm |
| 14 | Light pole door cutting time | for one normal light pole electrical door, the cutting time is about 30~40 seconds) |
| 15 | Main motor/Brand | Stepless motor/Chinese |
| 16 | CNC system | Si Dafeng(SF-2100S) |
| 17 | Nesting SOFTWARE | SmartNest |
| 18 | Control axis | 3 axis, X,Y,A |
| 19 | CNC Plasma cutting torch | 1 set |
| 20 | Arc voltage height controller | HEAVTH HP105 |
| 21 | height DEVICE | Plasma Torch height moving device, 1set |
| 22 | Environmental temperature | 0-45℃ |
| Option:special big cabinet with cabinet type air condition , the CNC system and Plasma power souce inside. ( it needs additional cost) | 0-55℃ | |
| 23 | Humidity | <90%, no condensation |
| 24 | Surroundings | Ventilation, no big shake |
| 25 |
Input voltage (Can be made according to buyer’s country voltage requirement.) |
Single phase,220V, 50HZ Three phases, 380V, 50HZ |
Contact Person: kimi
Tel: 15861457507
Fax: +86-510-68930088
