|
Product Details:
|
Product Name: | Light Pole Door Cutting Machine | Max. Cutting Length: | 2000mm |
---|---|---|---|
Model: | 680/2000 | Plasma Source: | Hypertherm Powermax 65 |
Control Axis: | 3 Axis, X,Y,A | ||
Highlight: | 680mm Light Pole Door Cutting Machine,2000mm Light Pole Door Cutting Machine,3 axis cnc cutting machine |
Model 680/2000 CNC 2000mm Light Pole Door Cutting Machine
Description:
The cutting source is automatic plasma. So the cutting speed will be much fast, and cutting edge quality is much better then flame cutting.
Application:
It is suitable for conical pole, round pole, octagonal light pole and highmast door CNC cutting, Also it can flat plate . The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw designed by computer.
Main parameters:
No. | Item | Parameter |
1 |
Max. cutting length, X axis |
2000mm (for once stroke cutting) |
2 |
Max. cutting length, X axis |
1500mm |
3 |
Rotation angle, A axis |
Any angle 0~360 degree |
4 | Min outer diameter | 58mm |
5 | Max outer diameter | 680mm |
6 | Max.length for pole | 12000mm |
7 | Max.thickness for highmast | 8mm |
8 | Plasma source |
Hypertherm Powermax 65 (Made in USA) |
9 | Suggestion thickness for making hole and quality cutting. | 8mm |
10 | Quality Cutting speed ,thickness 4mm | 4250mm/minute |
11 | Quality Cutting speed ,thickness 6mm | 2550mm/minute |
12 | Quality Cutting speed ,thickness 8mm | 1700mm/minute |
13 |
Max plasma edge cutting thickness(manual holding way) |
Base on Plasma source 14mm |
14 | Light pole door cutting time | for one normal light pole electrical door, the cutting time is about 30~40 seconds) |
15 | Main motor/Brand | Stepless motor/Chinese |
16 | CNC system | Si Dafeng(SF-2100S) |
17 | Nesting SOFTWARE | SmartNest |
18 | Control axis | 3 axis, X,Y,A |
19 | CNC Plasma cutting torch | 1 set |
20 | Arc voltage height controller | HEAVTH HP105 |
21 | height DEVICE | Plasma Torch height moving device, 1set |
22 | Environmental temperature | 0-45℃ |
Option:special big cabinet with cabinet type air condition , the CNC system and Plasma power souce inside. ( it needs additional cost) | 0-55℃ | |
23 | Humidity | <90%, no condensation |
24 | Surroundings | Ventilation, no big shake |
25 |
Input voltage (Can be made according to buyer’s country voltage requirement.) |
Single phase,220V, 50HZ Three phases, 380V, 50HZ |
Contact Person: kimi
Tel: 15861457507
Fax: +86-510-68930088